Published at Thursday, May 03rd, 2018 - 05:24:23 AM. Action Figures. By Hillary.
The method for creating action figures that is described here assumes that the base body upon which you will build your creation is readily available and also that you will need to make only a few modifications to the base body. Use an action figure base body that is close in shape design and color to your desired creation but you can make it easy on yourself if you craft your design around the types of action figures that are readily available. There are many soldiers superheroes knights and other generic action figure toys that would serve as suitable base bodies. You may wish to stay away from base bodies that have many attached pieces and accessories that will need to be removed requiring a lot of time and effort to pry off or sand down.
Take equal amounts of Part A and Part B: just enough for the feature or accessory that you are making. Part A comes in many different colors but for customizing white natural or black are recommended if you plan to paint the compound. If you choose to use a Part A that is white or natural you can add dye or powdered coloring to make your own hues of the clay. Mix Part A and Part B kneading until the two parts are homogeneous and with the consistency of clay. Before working with it let it harden a bit for about 30 minutes. Note that the compound can sit for up to 3 hours before it is no longer malleable.
Any content, trademark’s, or other material that might be found on the Manix-Reinforced website that is not Manix-Reinforced’s property remains the copyright of its respective owner/s. In no way does Manix-Reinforced claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.